How to Set Temperature on Antarctic Star 15 Inch Beverage Fridge
By Antarctic-Star Wine Cabinet Beverage Refrigerator Ice Maker | Published: 2026-10-24
Category: How-to Guides
Learn the correct steps to adjust the temperature on your Antarctic Star 15 inch beverage refrigerator, including common mistakes to avoid for optimal cooling performance.
Quick Answer
Use the digital control panel on the front of your Antarctic Star 15 inch beverage fridge to adjust the temperature in 1°F increments. Wait at least 24 hours after plugging in before making final adjustments.
Understanding the Control Panel
The Antarctic Star W5885B (and similar 15 inch models) uses a simple digital touch panel. The display shows the current interior temperature, and the up/down arrows let you set your desired temperature between approximately 36°F and 50°F. Because this is a beverage cooler, not a freezer, it cannot reach freezing temperatures.
Why 24 Hours Matters
When you first plug in the fridge, the compressor needs time to stabilize. Adjusting the temperature immediately can lead to overshooting or inconsistent cooling. Let the unit run for a full day with nothing inside, then load it gradually. The automatic defrost system will handle frost buildup, so you don't need to worry about manual defrosting.
Step-by-Step Temperature Adjustment
- Plug in and wait 24 hours: Connect the fridge to a grounded outlet. Do not load any beverages yet. Let the unit run for at least 24 hours so the compressor and interior temperature stabilize. Common mistake: adjusting the temperature too early can cause inaccurate readings. Be patient.
- Locate the control panel: Find the digital display on the front door. It shows the current temperature. Press and hold the 'Set' button (or similar) for 3 seconds until the display flashes. If the display does not flash, try a longer press. Some models require holding for 5 seconds.
- Set your target temperature: Use the up (▲) or down (▼) arrows to adjust the temperature in 1°F increments. For most sodas, beer, and wine, a setting between 38°F and 45°F is ideal. Press 'Set' again to confirm. Avoid setting below 36°F – the fridge is not designed for freezing and may struggle or frost excessively.
- Check the actual temperature after 12 hours: After adjusting, wait 12 hours and check the display. If the temperature is still higher than your target, lower it by 2°F and wait another 12 hours. Repeat until stable. Small adjustments are better than large jumps. Drastic changes can confuse the thermostat.
Product Reference
- Antarctic Star 15inch Beverage Refrigerator W5885B: The Antarctic Star 15 inch beverage refrigerator (W5885B) has a 2.9 cu. ft. capacity and operates at 40 dB, making it quiet enough for a home bar or office. Its compact size fits under a counter, and the low noise level means you can place it in a living area without disturbance.
Antarctic Star 15inch Beverage Refrigerator W5885B
